Logic pro x disk is too slow or system overload. (-10010) free download
In this free help article, we take a look at 5 common error codes that can come up in Pro Tools , , , , and There are usually two main ways Pro Tools reports errors DAE can’t get audio from the disk fast enough. Your disk may be too slow or too fragmented.
The leading cause of the error is recording, playing back, or bouncing to a drive that is literally “too slow or too fragmented”. A lot of the advice relates to older computer systems with Firewire or USB drives etc.
In my experience errors come up at the point Pro Tools cannot get all the data on and off the session drive fast enough. That can be because the data is too fragmented, ie bits of the audio file are spread across the drive, but again things have moved on so much that fragmentation isn’t always the issue.
Also, the reasons for error messages can be many and varied, but can include the fact that the computer is too busy to serve Pro Tools in a timely manner, which could be background applications running and so on. Disk too slow or too fragmented” is a variation on the same problem but in this case, it is the PCI bus that is getting clogged up so that Pro tools can’t get the data fast enough.
Disk Cache came to Pro Tools Vanilla in version Even so, it is still possible to get errors with Disk Cache. Avid recommend that you wait until Disk Cache has finished caching the timeline to begin playback. Check your Disk Cache settings. Some users have reported that if it is set to Normal Pro Tools can still produce or errors. Increasing the Disk Cache to say 10GB providing you have the memory for it may resolve the problem.
Look at any application that might be scanning drives creating catalogs etc, as they will make the hard drive have to work harder. Spotlight indexing has been found to cause “disk too slow” errors while recording in Pro Tools. You can disable Spotlight indexing:. Audio tracks with lots of edits, as can be created when using Beat Detective, can also cause errors.
Bounce to disk, Consolidate, or using Track Commit all can help. If you have a lot of tracks in a session then consider splitting your audio tracks up across multiple drives to prevent this error. Partitioning large drives into volumes no larger than around 9 gigs in size can help prevent fragmentation. But partitioning drives can also cause issues and again this largely relates to older systems. Large drives now rarely need partitioning for performance reasons.
Firewire drives have been known to cause errors. This is another common error on Pro Tools that can occur in a wide range of circumstances. Pro Tools ran out of CPU power. Try deactivating or removing Native plug-ins. AAE error Pro Tools This can occur if you are pushing the CPU too hard. If using a Click Track in Pro Tools Avid report this problem was resolved in Pro Tools The temporary workaround is to render the click using Commit or offline bounce and import after bounce deactivating the Click Track.
If this error is occurring with a real-time bounce, try enabling the Offline option in the bounce dialog box or bounce to a track, rather than use Bounce To Disc. This error code can be caused by a plug-in. Track down and remove the offending plug-in and should be good again. The troublesome plug-in doesn’t have to be in your session. Just being in the Plug-ins Folder is enough.
It seems to manage the sudden CPU spikes that can trigger errors. Some Windows users have reported improvements when Hyperthreading is turned off, although it would seem this is much less helpful for Mac users. Avid even went as far as to canvas Pro Tools users with a customer survey on errors especially on Windows 7 and 10 systems. There is a post on the Pro Tools Ideascale on this too. Real-time bounce to disk fails with an AAE error.
Avid reports that this was fixed in Pro Tools But suggested workarounds for previous versions are So check your plug-ins and make sure that they are all up to date. This error means “Device is not present” and is likely due to a missing driver for your interface. This is likely to be on a Windows machine. Download and install the driver for your audio interface download drivers for Avid interfaces. Hold the N key down immediately after launching until the Playback Engine window opens to select your device.
If the same error occurs, Avid recommend you try the following Right-click the Speaker Icon you can see on the lower right side of your screen. Then, click Playback Devices. Do the same in the Recording tab beside Playback on top of the dialogue box After all the Playback and Recording devices are disabled, try to run Pro Tools First again.
If it runs, you can enable all the sound devices again. Although the error is most likely to happen in Pro Tools First, it can happen in other versions of Pro Tools when it cannot find an audio interface. One user with Pro Tools Finally, re-activate the correct audio device and drivers and it worked fine. Please choose another audio device. Their fix was to go to Playback devices on the Windows toolbar and make sure the Apollo was enabled.
Then go into Recording devices and make sure the Apollo was disabled. This error usually pops up when the hardware buffer size is too low and relates to other CPU Overload Errors at Low Buffer Sizes, but the key issue is low buffer sizes. In the Pro Tools When using Pro Tools In the dual 6-core CPU example, the desired Host Processor setting to avoid errors strictly related to this bug would be However, this bug is not known to occur on single CPU configurations.
A DAE error can be encountered when recording large track counts at high sample rates and low buffer sizes with the HD Native Thunderbolt interface, Pro Tools This is an issue specific to the non-Retina MacBook Pro computers 8,1 8,2 and 8,3.
Use a different computer Retina MacBook Pro computers do not encounter this error. Turn Disk Cache off while recording at higher sample rates. This is a weird one as the suggestion in the error message is completely misleading. Either way, what this may actually mean is that Pro Tools is looking for a missing file or drive, which might occur if the session’s storage device becomes unmounted. Avid recommend that you ensure the session’s storage volume is still available, and then quit and relaunch Pro Tools.
There is no way to adjust AAE’s preferred size. So there are 5 error numbers that can come up regularly, but there are hundreds more, if you are having trouble with error messages in Pro Tools then Google is your friend. Alternatively, go to the Avid Troubleshooting pages and put the error number in and finally don’t forget to try the DUC Search page too.
If you are getting Pro Tools error messages then do let us know in the comments and we may put together another one of these articles. Mike Thornton has been working in the broadcast audio industry for all his working life, some 44 years.
Mike has worked with Pro Tools since the mids recording, editing and mixing documentaries, comedy and drama for both radio and TV as well as doing the occasional music project.
DAE and more recently AAE error ” The leading cause of the error is recording, playing back, or bouncing to a drive that is literally “too slow or too fragmented”. Also, the reasons for error messages can be many and varied, but can include the fact that the computer is too busy to serve Pro Tools in a timely manner, which could be background applications running and so on The PCI Bus version “The PCI bus is too busy for DAE to communicate reliably with the audio hardware.
Advice On Errors On Older Systems If you have a lot of tracks in a session then consider splitting your audio tracks up across multiple drives to prevent this error. AAE error Pro Tools Other things to check Use the offline bounce feature in Pro Tools 11 Use a real-time bounce to track to print the mix Check Your Plug-ins errors can be caused by having older plug-ins in your plug-ins folder.
Hold the N key down immediately after launching until the Playback Engine window opens to select your device If the same error occurs, Avid recommend you try the following Right-click the devices and disable all sound device.
As a workaround, Avid recommend We Have The Answers.
Logic Pro X – Troubleshooting Guide – myBarton – Digital Learning.need some pro help, upgrades seem to have made logic worse! – Logic Pro – Logic Pro Help
実はLogicスレでちょっと話題になってるんだがオーディオトラックを5~20くらい作る ディスクが遅すぎるか、システムのオーバーロードです() Alternatively you can here view or download the uninterpreted source This dictionary is free software; you can redistribute it and/or